keropro.blogg.se - Sony firmware update removes media player

#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER INSTALL#
#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER UPDATE#
#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER SOFTWARE#
#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER DOWNLOAD#

#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER UPDATE#

Note: If the last four digits of the version number are 0510, the firmware update was successful.

Check the current firmware version to confirm that the update has successfully installed.

Doing so may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING! Do not operate or power off the player until the update is complete.

The firmware update is complete when "DONE" appears on the player front panel display and the Blu-ray Disc player automatically powers off.

#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER SOFTWARE#

The software update starts and the progress screen is displayed on the television.

The Blu-ray Disc player will restart itself when it is complete and the second portion of the update will start.

Note: The "*" changes to "0" through "9," indicating the update progress.

During the update, the message "*/9" is displayed on the television and "UP*/9" is displayed on the player front panel display.

The first portion of the update process starts and the progress screen is displayed on the television.

Select "OK" and then press the ENTER button.

The message "Perform version update?" is displayed on the television.

At the xross media bar™ menu, use the arrow keys on the remote control to select "Setup" - "Network Update" and then press the ENTER button.

If there is a disc in the player, please remove the disc.

Connect the "LAN(100)" terminal on the player to your Internet source using an Ethernet cable.

Note: The firmware update process usually takes about 15 to 30 minutes, depending on system configuration and network connection. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING! Please follow the update instructions carefully.

It is highly recommended that you print out these instructions for use as a reference during the installation process.

In order to perform the firmware update, it is necessary to have the player correctly connected to a compatible television.

#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER DOWNLOAD#

Note: If you cannot connect the player to your Internet source, please see the Download the Firmware and Create an Update Disc section below for information about firmware update disc options. In order to use this update method it is necessary to have the player correctly connected to an active Internet connection.Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING! Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet.WARNING! Please follow the update instructions carefully.If you have not done so already, please check the current firmware version to determine if this firmware update is needed for your Blu-ray Disc player.Sony highly recommends that you use the Network Update method to update the Blu-ray Disc player firmware. The Network Update operation is straightforward. If you have questions or require assistance, please contact Sony Support at 1-866-909-SONY (7669). Please see the Download the Firmware and Create an Update Disc section below, for more information.If you cannot connect the Blu-ray Disc player to your Internet source, please use the disc update method.Please see the Network Update Instructions section below, for more information.You will need to connect the Blu-ray Disc player to your Internet source using an Ethernet cable.Sony highly recommends that you use the Network Update method. The Network Update operation is straightforward.There are two ways to update the Blu-ray Disc player firmware:

#SONY FIRMWARE UPDATE REMOVES MEDIA PLAYER INSTALL#

If the last four digits of the version number are 0510 or higher, it is not necessary to install this firmware update. The firmware version currently installed on the Blu-ray Disc player will be listed on the television screen.Use the arrow keys to select "System Information", and then press the ENTER button.Otherwise, the firmware update may not succeed. If the "Quick Start Mode" is set to "On", change the setting to "Off". Use the arrow keys to select "Quick Start Mode" and make sure that the "Quick Start Mode" is set to "Off".Use the arrow keys on the remote control to select "Setup" - "System Settings", and then press the ENTER button.If the Blu-ray Disc player starts to play a disc, press the "STOP" button and wait until the xross media bar™ menu is displayed on the television before proceeding.Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.